spec no: dsab8249 rev no: v.4 date: mar/23/2005 page: 1 of 3 approved: j. lu checked: allen liu drawn: h.q.yuan package dimension s l - 103idt high efficiency re d description the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. 2mmx5mm rectangular solid lamp features z low power consumption. z reliable and rugged. z excellent uniformity of light output. z suitable for level indicator. z long life - solid state reliability. notes: 1. all dimensions are in millimeters (inches) . 2. tolerance is ? .25(0.01") unless otherwise noted . 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice .
spec no: dsab8249 rev no: v.4 date: mar/23/2005 page: 2 of 3 approved: j. lu checked: allen liu drawn: h.q.yuan selection guid e electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. symbol parameter device typ. max. test conditions units peak peak wavelength high efficiency red 627 nm i f =20ma d dominant wavelength high efficiency red 625 nm i f =20ma ? 1/2 spectral line half - width high efficiency red 45 nm i f =20ma c capacitance high efficiency red 15 pf v f =0v;f=1mhz v f forward voltage high efficiency red 2.0 2.5 v i f =20ma i r reverse current high efficiency red 10 ua v r = 5v part no. dice lens type iv (mcd) @ 10ma viewing angle min. typ. 2 1/2 l - 103idt high efficiency red (gaasp/gap) red diffused 1.8 5 110 parameter high efficiency red units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 160 ma reverse voltage 5 v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3 . 5mm below package base.
spec no: dsab8249 rev no: v.4 date: mar/23/2005 page: 3 of 3 approved: j. lu checked: allen liu drawn: h.q.yuan high efficiency red l - 103idt remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
